XC的博客
Valve-FUSE ASSEMBLY-阀门/液压保险维修手册

Author:

xc

©

Wordage:

共计 1903 字

needs:

约 1 分钟

Popular:

118 ℃

Created:

目 录

Valve-FUSE ASSEMBLY-阀门/液压保险维修手册
CMM-27-32-03-97415-20100208-007-.pdf
CMM-29-09-11-92003-19730901-000-.pdf
CMM-29-11-01-91816-20020703-003-.pdf
CMM-29-22-01-91816-20061112-004-.pdf
CMM-32-31-04-97415-20070430-012-.pdf
CMM-32-31-04-97415-20100203-016-.pdf
CMM-32-40-04-06177-20041210-001-.pdf
CMM-32-40-04-92003-20000111-006-.pdf
CMM-32-40-05-06177-19850730-000-.pdf
CMM-32-40-10-97415-20100930-005-.pdf
CMM-32-40-11-97415-20090806-007-.pdf
CMM-32-40-12-97415-20091115-012-.pdf
CMM-32-40-13-97415-20090617-010-.pdf
CMM-32-40-16-97415-20100905-003-.pdf
CMM-32-40-18-97415-20080310-009-.pdf
CMM-32-40-18-97415-20100205-013-.pdf
CMM-36-10-13-92003-20060131-012-.pdf
CMM36-13-99.pdf
IPC 29-11___026.PDF
IPC 29-15___017.PDF
IPC 29-21___026.PDF
IPC 29-22___017.PDF

液压阀.png

液压保险.png

Description

The Quantity Measuring Fuse Assembly, is an in-line sensor that monitors the quantity of hydraulic fluid passing through, then blocks the flow when a desired quantity has passed. The fuse can then be reset by either flowing fluid in the reverse direction or by lowering the differential pressure across the fuse assembly to 5 psid. (34.5 kPa). There is also a threshold feature built in that will not allow the fuse to close when the flow rate is less than .02 gpm (.08 lpm).
The major control elements of the fuse assembly are the slide and the sleeve. These two components, along with the regulator spring, form the regulator. The metering slot, which allows fluid to flow into the piston cavity, is located in the sleeve and is also controlled by the movement of the slide.

共计 0 条评论,点此发表评论
博客主页 行业知识以及项目经验分享,是件有意义的事情。为国家培养中层力量,发挥自己的一点作用! 51统计
蜀ICP备2022005623号 川公网安备 51012202001212号 本站已运行 269 天 20 小时 33 分 Copyright © 2022 ~ 2022. xc的博客 All rights reserved.
历史足迹
分类目录
  • 💼工作
  • 🏠生活